Straight Router Bit Two Flute
Cutting Diameter: 3/8" (9.53mm)
Classification: Standard (Yellow)
The Two-Flute Straight Router Bit is a core staple for any woodworker who demands a fine finish on basic,
square-sided cuts.
Engineered with two precision-ground carbide-tipped cutting edges, this bit provides superior balance and minimal
vibration by allowing two cuts per revolution. This geometry results in an exceptionally smooth and clean surface
ideal for applications where the final appearance is critical.
It is the perfect choice for routing precise grooves, dadoes, and rabbets in hardwood, softwood, plywood, and
various composite materials.
While the two flutes offer a cleaner cut than single-flute alternatives, requiring a slightly slower feed rate for
optimal chip clearance, the trade-off is a high-quality, professional finish, making it indispensable for joinery
work, cabinet construction, and general-purpose edge-routing.
Application:
- Router bits are for use with router machines only.
- Be sure that at least 3/4 of the shaft length is inserted into the router collet.
- Do not 'bottom-out' the bit in the collet. The shank should be 1/8' from the bottom of the collet.
- Route in two or more passes when large amounts of stock must be removed.
- Carpenters
- Craftsmen
- Hobbyists
- Woodworking
- DIY
Brand
TORK CRAFT
Title
Tork Craft Router Bit Straight 3/8' (9.53 Mm) Ckp203
Recommended For You
Recently Viewed Products
We accept
