Dimpler Drywall Driver Display Box With 10 X Dim001

• Extends bit life
• Countersinks screws perfectly
• Prevents stripping screw heads

Converts electric drills into professional screwguns!

A must for Drywall...

It prevents screwheads from penetrating too far, tearing through the paper layer
and weakening its core.

Three
more reasons for using The Dimpler:

1. Prevents over-driving the screw - preset clutch releases as soon as the
   screw reaches its precise countersunk depth. Even if the drill is still turning,
   the bit stops.
2. This prevents stripping the bit and/or screw head, which can damage the
   screw's protective coating.
3. It helps protect your drill's motor since over-tourqing is eliminated.

Reversing feature:

1. Set your drill on REVERSE (see drill's instruction manual if you are unsure).
2. Grip The Dimpler head firmly, push in about 1/4' and rotate clockwise until
   you feel it click/lock. The driving bit will now be exposed to engage countersunk
   screws. To reset The Dimpler to Drive mode, push and rotate counter-clockwise
   until the head pops back out.

Refill your Display box
with the individual DIM001